EzyJamb  |  1300 EZYJAMB

Q. What's so unique about the EZYJamb flush finish door jamb?
A. EZYJamb is the only door jamb system that eliminates trim, giving you that subtle, contemporary, clean line look. It’s durable, it’s affordable and is at home in commercial offices and showrooms, quality homes and public spaces like hospitals and schools.

Q. How is the EZYJamb constructed? 
A. EZYJamb is split type architrave-free door jamb system which is fully adjustable to any wall thickness.

Q. How is EZYJamb fixed?
A.  EZYJamb is screw fixed to the jamb studs and header with flat headed screws every 200mm (through the perforated sides), into the wall stud, becoming a solid part of the wall structure.

Q. How is the architrave-free EZYJamb finished with plaster walls? 
A. EZYJamb is fitted after the plaster lining has been installed, and has 35mm perforated sides for flush finishing with top coat into the walls, achieving clean architrave free lines around the doorway.

Q. Can I fit architraves with the EZYJamb system? 
A. Yes, architraves can be fitted, but the EZYJamb concept is to create an ‘architrave-free’ opening.

Q. What about skirting — what can be used? 
A. Any type of skirting can be used but to compliment the flush finish look — “Alubase” slim line aluminium skirting which is only 1.6mm in thickness is the best matching option.

Q. What about finishing — do I have to use any special paint? 
A. EZYJamb frames are manufactured from zinc annealed steel and can be painted without any special preparation, so long as it is free of dust, dirt and oil.

Q. What about hinges?
A. EZYJamb can be used with a variety of concealed and non-mortised hinges. Stainless Stainless steel EZYJamb hinges are provided with each door frame (lift off hinges are available if required).

Q. Can EZYJamb be used if I have a solid core door?
A. Yes, EZYJamb can be used with a solid core door. You will need to make sure that you are using the correct hinge and quantity to accommodate the door weight.

Q. Will plaster crack around the edges of the finished EZYJamb? 
A. Plaster around the edges of the EZYJamb will not crack if the EZYJamb is installed according to the installation guide — i.e. must be screwed off every 200mm and double screwed at the hinge points and top corners. EZYJamb then becomes an integral part of the wall.

Q. Can EZYJamb be used in a doorway with no header? 
A. Yes, custom made EZYJambs are available with no header for full height doors.

Q. How long does it take to fit an EZYJamb frame? 
A. 10 -15 minutes depending on the installer.

Q. Can EZYJamb be used with masonry or brick walls?
A. Yes, masonry wall installation instructions are available contact This email address is being protected from spambots. You need JavaScript enabled to view it. for more detail.

Q. How can I achieve that flush finish look throughout the rest of my project?
A. Check out our extensive EZY-Finishing range.

Q. Cavity sliders— how do I match in the clean line look?
A. A range of Cavkit trims are available to transform your existing cavity slider unit into an architrave free door way. We can also supply complete flush finish Cavkits. Contact us to find out more about our SlideSet flush finish cavity sliding system.

Q. Can I match my windows with the clean line look? 
A. Yes, a large range of EZY Reveal angles are available so that your whole project will blend in with the architrave free look.

Q. Is EZYJamb fire rated? 
A. Yes, EZYJamb has been tested in the US by Intertek and is fire rated up to 90 minutes (for the US region).

Q. What jamb studs do I use for the opening for a Ezyjamb?  
A. The manufacturer strongly recommends a timber stud or a 0.75 BMT metal stud on both sides of the opening.

Q. Are your frames welded?  
A. EZYJamb frames are not welded and are clipped together using a unique EZYJamb system that ensures an easy install and smooth finish.

 

Copyright © 2015 EZYJamb. All rights reserved.