Ordering for Australia

Both getting a quote for the EZY-JAMB product, and ordering it are very simple. Just follow the Ordering Instructions and fill out the Order Form and e-mail it to sales@ezyjamb.com.au

Download Australian Order Form.

Instructions on filling out the EZY-JAMB Order Form – AUSTRALIA ONLY

Company: This should be filled in with the Purchasing Company's actual address, contact name, phone & fax number.

DELIVERY Address: This should be filled out with the delivery address if different than the one above. If it is the same, please write "same".

Door Height ( this is the actual door height not the stud opening size):
Select either the standard 2040 or 2340 door height. If a custom door size is required refer to the lower custom section.

Door Width ( this is the actual door width not the stud opening size):
Select either the standard door width from the check boxes. If a custom door width is required refer to the lower custom section.

Door Thickness: Select Door thicknesses of 35mm and 38mm are available.

Finished Wall Thickness: Total thickness of the wall studs and the lining material on the finished wall. Select the standard wall thickness from the check boxes. If a custom wall thickness is required refer to the lower custom section.

Door Handing: Either LH or RH. Example below.

DOOR HANDING FOR AUSTRALIA

 

 

Hardware: All EZY JAMBS with a door height of 2040mm (except double doors) will be supplied with the following hardware:

2 X Stainless Steel HINGES, 1 X Stainless Steel LATCH PLATE, 1 X PLASTIC INSERT AND LATCH PUNCHED @ 1020mm

All EZY JAMBS with a door height of 2340mm (except double doors) will be supplied with the following hardware:

3 X Stainless Steel HINGES, 1 X Stainless Steel LATCH PLATE, 1 X PLASTIC INSERT AND LATCH PUNCHED @ 1020mm

All EZY JAMBS with a double door height of 2040mm will be supplied with the following hardware:

4 X Stainless Steel HINGES

All EZY JAMBS with a double door height of 2340mm will be supplied with the following hardware:

6 X Stainless Steel HINGES

Strike Plate Height: The measurement from the bottom of the door to the center of the strike plate punch. This is punched at a standard height of 1020 from floor. If a custom punch height is required refer to the lower custom section.

Extra Hardware: If extra hardware or lift off hinges are required refer to the lower custom section.

Quantity: Quantity of door frames of this size that is required.

Any other questions can be answered by our well trained sales professionals. Feel free to give us a call or fill out the form below.

Name *

Phone

E-Mail *

Comments

Type the following: For security purposes, please type the letters in the image.